Many C4 Corvette users have considered lowering their vehicles due to the enhanced aerodynamics and performance that they have from it. But, if you are planning the same, how to lower C4 Corvette?
To lower a C4 Corvette, you need to lift the car using jacks and jack stands. Then you have to remove the wheels. After that, replace stock springs with lowering springs or adjust coil-overs. Then properly align the components and go for a test drive, that’s all!
Why Do You Need To Lower A C4 Corvette?
Lowering a C4 Corvette may provide you with some substantial benefits. If you choose to lower your vehicle, here are some benefits that you can get out of the modification:
- Visual Appeal: If you like to have a sporty appearance on the roads, lowering your car will give you that. The lower car height will make it look like a sports car while enhancing the overall look of the vehicle and making it stand out from stock models.
- Improved Handling: When you lower your C4 Corvette, you will essentially change its center of gravity. Therefore, this modification will have a positive impact on its handling characteristics. You will have less body roll during cornering and provide better stability at higher speeds. This especially helps if you are a new driver, the better handling makes it smooth to cross the rougher roads.
- Better Performance: Lowering your C4 Corvette can provide you with a better performance than before. Many users shared that they have found exceptional performance due to the reduced aerodynamic drag and improved traction. Users who modified their car to lower got more stability while turning the corners and curves.
How To Lower C4 Corvette? Steps Mentioned
After knowing the benefits, if you choose to lower your C4 Corvette, you are making a good decision. Here are the steps to follow if you are doing it on your own:
First, set the emergency brake after parking the car on a surface level. To make sure your car doesn’t move, place a block of wood over the jack plate. Now, you have to slide the jack from under the front of the car.
Now lift the car using the jack. To keep your car stable like that, place jack stands on the side frame rails. Now remove the wheels and tire while disconnecting the sway bar.
At this point, you have to place the jack under your car’s lower control arm parallel to the front leaf spring. Keep on raising the jack until the shock absorber starts moving. After that, use a socket wrench to remove the shock bolts from the car.
Find the lower ball joint in the steering part and take out the small pin below the nut using narrow pliers. Remove the nut and use a tool to pull out the ball joint and the connection to the steering rod. Move the knuckle part aside and keep it steady with some pieces of wood.
Now you have to lower the jack. This will reduce the pressure from the spring. Then, repeat the 2nd, 3rd, and 4th steps on the other side. Once it’s done, you need to cautiously remove the spring.
Once you have removed the spring, find two rubber bumpers and pivots on the spring. Then cut them using a knife without damaging the composite spring. Then use some weatherstrip adhesive on the flat side of the new spring wedges.
Now attach the new spring wedges in the same place as the old ones and place a piece of masking tape over them to dry them off. Then reattach all the suspension parts and reinstall the components like wheels and tires.
After everything, you need to replace the old bolts with new bolts, and the castle nut alongside the cotter pin. Once you are done, lower the jack and redo the process on the other side. Make sure that you have secured equal measurements on both sides.
Once you have completed lowering the vehicle, go for a test drive. If you think that you need to check something, do it so you don’t leave anything behind.
Disadvantages Of Lowering Your C4 Corvette
Although users have found many advantages to lowering their C4 Corvette, some have some complaints too. So, watch out for any of these things potentially has the chance to bother you:
- Lack Of Ride Comfort: As you are lowering your car, it might make the journey uncomfortable when you are used to a particular height. This especially gets more bumpy on rough or uneven roads. You might feel that somehow the ride quality is not top-notch like before.
- Less Ground Clearance: You will get less ground clearance if you lower your vehicle. This messes up when you try to pass bumpy or uneven roads, speed bumps, or even steep driveways. Oftentimes, exports don’t suggest lowering your car unless you are an expert in navigating certain road conditions.
- Tire Wear: There is a certain calculation that you need to keep in mind while lowering your C4 Corvette. In this case, if you don’t pay mind to the calculation, the alignment will be wrong leading to uneven tire wear. Eventually, you might need to replace your tires more often which can be frustrating.
- Warranty Concerns: When you lower your vehicle, it messes up some of the warranty claims. Therefore, if you face any accidents, you might not be able to claim the given warranty that was valid before the modification. Moreover, some states also have a particular law about lowering your vehicle which might get you into trouble.
Frequently Asked Questions (FAQs)
1. What is the easiest way to lower a C4 Corvette?
The easiest way to lower a C4 Corvette is by installing lowering springs or coil overs. These kits offer straightforward installation and adjustable ride height options. But make sure that you are perfecting the alignment so everything remains good.
2. Does C4 Corvette have adjustable suspension?
Some C4 Corvettes might have adjustable suspension systems, but it’s not a common feature in stock models. There are adjustable suspensions in aftermarket stocks.
3. How do you lift a C4 Corvette?
You can use a hydraulic floor jack to lift the car from the designated lifting points, usually located near the wheels. Secure the car with jack stands before working underneath.
4. Can you mod a C4 Corvette?
Yes, you can modify a C4 Corvette. Common modifications include suspension upgrades, exhaust enhancements, engine tuning, and aesthetic changes. However, make sure that you are considering proper research before you do any modifications to avoid messing up with the warranty.
READ NEXT: C4 Corvette Oil Change
Finally, you are on your way to applying everything that you know about how to lower C4 Corvette. Lowering or modifying any of your car components is fun until it messes up with your warranty claims. So, make sure that you are aware of your legal limits and warranty assurance before you proceed further.
Jack, a living encyclopedia of cars, embodies the spirit of automotive fascination. With an instinctual bond to Corvettes and autos, his expertise flows like a heartfelt conversation. From engines humming to sleek curves, he’s a human bridge to the car world’s soul.